BHWSB - ID 7328T108, H.S. BLUE 151180 85285 TYPE II
- MSDS: BHWSB
- Manufacturer: DEXTER COATINGS
- Product Name: ID 7328T108, H.S. BLUE 151180 85285 TYPE II
- National Stock Number: 8010-01-293-3013
Product Identification
Product ID:ID 7328T108, H.S. BLUE 151180 85285 TYPE II
MSDS Date:05/02/1989
FSC:8010
NIIN:01-293-3013
Kit Part:Y
MSDS Number: BHWSB
Responsible Party
HAYWORD, CA 94544
US
Emergency Phone: 415-796-4972, NIGHT
Info Phone: 415-471-7171, DAY
Cage: 0HKK2
Contractor
Telephone: 415-791-1961
Cage: 0HKK2
Ingredients
N-BUTYL ACETATE (SARA III)
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: <10%
OSHA PEL 150 PPM/200 STEL
ACGIH TLV: 150 PPM/200STEL;9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: <10%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL N-AMYL KETONE
CAS: 110-43-0
RTECS: MJ5075000
Fraction By Weight: <10%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM; 9192
1-METHOXY 2-PROPANOL ACETATE (VAPOR PRESSURE 3.8 MMHG @
CAS: 108-65-6
RTECS: AI8295000
Fraction By Weight: <10%
ETHYL 3-ETHOXYPROPIONATE (VAPOR PRESSURE 1.11 MMHG @ 20C)
CAS: 763-69-9
RTECS: UF3325000
Fraction By Weight: <10%
3.358 POUNDS PER GALLON LESS WATER
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVER EXPOSURE BY INHALATION MAY
CAUSE IRRITATION OF THE RESPIRATORY TRACT, HEADACHES, DIZZINESS OR
DROWSINESS. SKIN OR EYE CONTACT: IRRITANT TO THE EYES AND SKIN. MAY
ALSO AFFECT THE RESPIRATOR Y TRACT AND LIVER.
Effects of Overexposure:ACUTE: OVER EXPOSURE BY INHALATION MAY CAUSE
IRRITATION OF THE RESPIRATORY TRACT, HEADACHES, DIZZINESS OR
DROWSINESS. SKIN OR EYE CONTACT: IRRITANT TO THE EYES AND SKIN. MAY
ALSO AFFECT THE RESPIRATOR Y TRACT AND LIVER.
Medical Cond Aggravated by Exposure:UNKNOWN AT THIS TIME.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE. EYE CONTACT: FLUSH
IMMEDIATELY WITH LARGE AMOUNTS OF RUNNING WATER FOR AT LEAST 15
MINUTES. SKIN CONTACT: REMOVE CONTAMINATED CLOTHING AND WASH SKIN
WITH SOAP AND WAT ER. INGESTION: DRINK WATER. IF NECESSARY, CONSULT
A PHYSICIAN FOR ANY OF THESE CONDITIONS.
Fire Fighting
Flash Point Method:SCC
Flash Point:26 F/-3 C
Lower Limits:1.05
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. VENTILATE AREA AND REMOVE WITH INERT ABSORBANT
AND NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:CONTAINERS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES. DRUM
SHOULD BE INDUSTRIALLY CLEANED PRIOR TO REUSE.
Other Precautions:MAKE SURE THE DRUM IS COMPLETELY EMPTY BEFORE
ATTEMPTING TO WELD OR BRAZE. DO NOT FLAME CUT, BRAZE OR WELD
WITHOUT A NIOSH APPROVED RESPIRATOR OR APPROPRIATE VENTILATION.
Exposure Controls
Respiratory Protection:GENERAL DILUTION/LOCAL EXHAUST FAILS TO
ADEQUATELY DILUTE TWA/PEL USE RESPIRATORY PROTECTION: IN ACCORD
W/29CFR 1910.134, USE NIOSH/MSHA APPROVED AIR LINE TYPE
RESPIRATOR/HOODS FOR ENCLOSE/CONFINED AR EAS.AIR PURIFYING
RESPIRATOR OTHER AREAS
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST VENTILATION TO KEEP
TWA/LEL BELOW ACCEPTABLE LIMITS & TO REMOVE DECOMPOSITION PRODUCTS
Protective Gloves:CHEM RESISTANT IF REPEAT/PROLONG CONTACT
Eye Protection:SAFETY EYEWARE TO PROTECT AGAINST SPLASH
Work Hygienic Practices:KEEP CONTAINERS CLOSED WHEN NOT IN USE.
Supplemental Safety and Health
DO NOT TAKE INTERNALLY.
Chemical Properties
Boiling Pt:B.P. Text:>172F,>78C
Vapor Density:> THAN AIR
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES MAY CONTAIN CARBON MONOXIDE &
OXIDES OF NITROGEN. MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMP AS IN WELDING.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.